I just aborted Result ID 16972487, TRUNCATE_TERMINI_FULLRELAX_1ptq__433_139_0 at 1.04% after two+ hours (CPU run time preference =1 hour).

---

Iv'e got a stuck work unit at 1.042% complete (4h 50min) w/ 2 hr runtime preference. No activity in graphics mode.
https://boinc.bakerlab.org/rosetta/workunit.php?wuid=13936782

Please advise; should I terminate?

---

Aborting 7485_largescale_large_fullatom_relax_dec7485_1_47_1.pdb_432_95. Completed 1.76% after 2 hours with no further advance. Set for 2 hours.

---

!!Stupidity should be PAINFUL!!

Iv'e got a stuck work unit at 1.042% complete (4h 50min) w/ 2 hr runtime preference. No activity in graphics mode.
https://boinc.bakerlab.org/rosetta/workunit.php?wuid=13936782

Please advise; should I terminate?

I've aborted this work unit after six hours.
https://boinc.bakerlab.org/rosetta/result.php?resultid=17002591

---

This one ran for 6 hours stuck at 1.04%. I restarted BOINC and the WU began again at zero. It quickly ran up to 1.04%, but seemed to have hung again according to the graphics display. I aborted the WU after 14 minutes (the second time).

TRUNCATE_TERMINI_FULLRELAX_1enh__433_53_0 using rosetta version 498
https://boinc.bakerlab.org/rosetta/workunit.php?wuid=13904970

The fun continues,

https://boinc.bakerlab.org/rosetta/result.php?resultid=16988523
https://boinc.bakerlab.org/rosetta/result.php?resultid=17002662

Both aborted via cli due to 1% error, 12 hours lost.

---

here is one that cost me dearly

https://boinc.bakerlab.org/rosetta/workunit.php?wuid=13792169

10 Apr 2006 22:50:35 UTC 12 Apr 2006 3:54:52 UTC Over Client error Done 70,199.00 105.31 ---

---

Another:

https://boinc.bakerlab.org/rosetta/result.php?resultid=16998699

9.5 hours - 1% manually killed

---

home1 rosetta@home 4/11/2006 9:48:33 PM Unrecoverable error for result TRUNCATE_TERMINI_FULLRELAX_2tif__433_106_0 (aborted via GUI RPC)

https://boinc.bakerlab.org/rosetta/result.php?resultid=16970267
Exit status -197 (0xffffff3b)
application version 4.98
Stuck at 1.04%

1 of my clients hasnt contacted bakerlab since 23 march, will investigate this evening why it died...

---

This is so not my day, maybe I'll hit the record for most lost work in a 24 hour period.

https://boinc.bakerlab.org/rosetta/result.php?resultid=17029579

21,256.53 seconds still at 1% manually aborted.

---

Got another two units stuck at 1%, aborted 'm
TRUNCATE_TERMINI_FULLRELAX_1b3aA_433_355 after 6 hours
and
TRUNCATE_TERMINI_FULLRELAX_1b3aA_433_479_0 after 10 hours (seriously stuck, no counters increase except for the time)

---

and another one, 4.5 hours stuck at 1%:

https://boinc.bakerlab.org/rosetta/result.php?resultid=17043276

all these stuck units are from different systems and a mix of linux/windows.

---

Got also a WU stuck at 1% and aborted it

https://boinc.bakerlab.org/rosetta/result.php?resultid=17029338

TRUNCATE_TERMINI_FULLRELAX_1enh__433_691_0 after 2.5 hours

https://boinc.bakerlab.org/rosetta/result.php?resultid=17060746
https://boinc.bakerlab.org/rosetta/result.php?resultid=17044331
and
https://boinc.bakerlab.org/rosetta/result.php?resultid=17051524

ok whats the word on these work units this is really annoying.

---

ARGGGGGGGGGGGGGGGGGHHHHHHHHHHHHHHHHHH

Another failed project 17027763 12417632 11 Apr 2006 20:35:20 UTC 12 Apr 2006 12:28:07 UTC Over Client error Computing 44,064.20 136.62

This makes at least 5 projects with crashes and more than 5 cpu days wasted in total.

What the hell is happening. To Say I am frustrated is an understatement

---

This and no other is the root from which a Tyrant springs; when he first appears he is a protector.”
Plato

ARGGGGGGGGGGGGGGGGGHHHHHHHHHHHHHHHHHH

Another failed project 17027763 12417632 11 Apr 2006 20:35:20 UTC 12 Apr 2006 12:28:07 UTC Over Client error Computing 44,064.20 136.62

This makes at least 5 projects with crashes and more than 5 cpu days wasted in total.

What the hell is happening. To Say I am frustrated is an understatement

Well don't feel to bad Jose I seem to have to abort 60 to 100 Hrs of wasted CPU time every DAY. I did abort just today 7 WU's STUCK at 1.04% for a total of 80 HRs

DAVID what are you going to do about solving this problem ??? Any end in sight?
Baby sitting your client does consume a lot of my time

---

If You Want The Best You Must forget The Rest
---------------And Join Free-DC----------------

2 WUs here stuck at 1.04%

TRUNCATE_TERMINI_FULLRELAX_1ptq_433_485_0
TRUNCATE_TERMINI_FULLRELAX_1enh_433_558_0

There are two more in this series to come; I'll abort the stuck ones and see what happens.

Edit: the subsequent WUs seem to be running ok, although one of them had already been aborted elsewhere. Anyway, they're both past 8% so fingers crossed. NB: my default is 4 hours and the two units above are the first to have stuck.

ARGGGGGGGGGGGGGGGGGHHHHHHHHHHHHHHHHHH

Another failed project 17027763 12417632 11 Apr 2006 20:35:20 UTC 12 Apr 2006 12:28:07 UTC Over Client error Computing 44,064.20 136.62

This makes at least 5 projects with crashes and more than 5 cpu days wasted in total.

What the hell is happening. To Say I am frustrated is an understatement

Well don't feel to bad Jose I seem to have to abort 60 to 100 Hrs of wasted CPU time every DAY. I did abort just today 7 WU's STUCK at 1.04% for a total of 80 HRs

DAVID what are you going to do about solving this problem ??? Any end in sight?
Baby sitting your client does consume a lot of my time

sounds to me like things are worse than they were a week ago, is this correct? the only change is that
we increased the default run time from 2 hours to 4 hours, which reduces network traffic at the cost of
an increased chance of work unit errors (because they are longer). we can set the default back to two hours and see if it helps. anyway--main question--are people seeing more stuck work units now than
7-10 days ago?

---